Excellent bedliner & undercoat and brake caliper paint online shopping with por15.com? POR-15 Metal Prep provides the best adhesion for POR-15 Rust Preventive Coating on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15 Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15 Rust Preventive Coating or any other coating. POR-15 Metal Prep is not caustic, corrosive, toxic or flammable.
I was prepared for this to be a messy process with difficult cleanup. It was the exact opposite. In fact, I wish I had poured out less of the product into my disposable dish, because I needed to brush on so little. It’s the consistency of water and brushes on just like water. My next step was several coats of the spray paint, which was also very easy. The hardest part was finding things from which I could suspend the items I was painting.
POR-15 Rust Remover will safely remove light to even heavy rust completely from metal surfaces and will not affect plastic, PVC, Viton, or most paints. One gallon derusts several hundred pounds of heavily rusted steel, this equates to around 1/2 to 3/4 pounds of dry rust removed per gallon. Rust Remover will not harm unrusted steel and is safe on other metals. Rust Remover has no fumes or bad odors and no VOCs. No sanding or scrubbing required. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. All of the rusted areas must be submerged in the Rust Remover for it to work. When all of the rust has been removed, rinse the metal pieces with water. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. For best results use POR-15 Cleaner Degreaser to clean parts before using POR-15 Rust Remover. Find additional information at rust remover.
I did a lot of researching looking for the best caliper paint for my 2002 Jaguar XKR calipers including POR-15, G2, VHT, Duplicolor, and BCS Automotive (UK). G2 was eliminated since once opened you need to use it since you had to add the 2 components together before using, BCS sounded awesome but not available here in the US. I eventually chose POR-15 (Red) and the results are just fantastic. My XKR is silver with the Red Center Caps and the red calipers just really pop. I could not be happier. I have read some complaints about the results but if you follow their Ste-by-Step instructions you will not be disappointed. Its a fair amount of time to do the job right but worth the effort IMO.
Rust is caused by moisture coming in contact with metal, which causes a chemical action called oxidation. All paints provide a measure of protection for a while, but since they are eventually softened and weakened by moisture, it is only a matter of time before moisture penetrates the painted surface and attacks the metal below. All of the so-called rust preventive paints on the market (except POR-15) are weakened by exposure to moisture. POR-15 is strengthened by exposure to moisture. Notice the hardness of the POR-15 coating. It doesn’t chip, crack, or peel like ordinary paints do, and its hardness will resist the wear and tear of every day life. Find additional information on https://por15.com/.