NN ethylene bis stearamide provider in China? Sainuo is the leading polyethylene wax manufacturer and EBS wax supplier for PE wax, Ethylene bis-stearamide, etc. Polyethylene wax lubrication dispersant with an annual output of 30,000 tons, production scale of international production base, 60,000 tons of production and sales capacity. For quotation, TDS, samples request, please contact us. If there is anything you’re not sure about or you just need a hand getting set-up you can call or email us(polyethylene wax supplier). Discover extra information on ethylene bis stearamide suppliers.
Polyethylene wax has good solubility with polyethylene, polypropylene, polyvinyl wax, ethylene propylene rubber and butyl rubber. It can improve the fluidity of polyethylene, polypropylene, ABS and the demoulding performance of polymethylmethacrylate and polycarbonate. Compared with other external lubricants, polyethylene wax has stronger internal lubrication for PVC. If you are looking for polyethylene wax suppliers, Sainuo will be the perfect choice. Sainuo is a professional polyethylene wax (PE wax) manufacturer for 15+ years, welcome to contact us for further information.
Polypropylene wax is a chemical substance produced by cracking, cut by heating, and pulverized by hot air. Higher melting point, lower melt viscosity, good lubricity, good dispersibility, can improve the gloss of plastic products. Widely used in chemical fiber pellets, electrostatic copy toner carrier manufacturing, ink abrasion resistance agent; LLDPE, HDPE and other polyolefin resin improvers and energy-saving agents; also used in polypropylene injection molding, drawing release agent, etc. See more details at https://www.sainuowax.com/.
The carrier resin is used as the medium to disperse the pigment and maintain a uniform and stable distribution, while ensuring that the final color masterbatch product presents the due particle state. Various polyolefin resins, polyvinyl chloride, ABS, pet, propylene ethylene copolymer elastomer and various targeted designated resins can become the carrier resin of color masterbatch. Plastic additives are essential elements for plastic processing and application. Although the amount of additives in plastic formula is insignificant, its effect on the improvement and improvement of product processing and application performance is unparalleled.
Use of internal and external lubricants: The amount of lubricant added to a system should enable the material to obtain uniform plasticization and sufficient fluidity under normal operating conditions. If the adjusted amount of external lubricant still cannot meet the requirements of material processing, a small amount of internal lubricant can be considered. There are many factors affecting the external lubricant. When using high surface active fillers, such as ultrafine calcium carbonate and active calcium, the amount of external lubricant needs to be increased due to their absorption and adsorption to the lubricant. When using impact toughening modifier, the possibility of adhering to the metal surface is large due to the high melt viscosity, so it is often necessary to increase the amount of external lubricant.